T-bolts can be directly inserted into the aluminum profile groove. It can be automatically positioned and locked during installation. It is usually used with flange nuts. When the angle is installed, it is a standard matching connector. It can be selected and used according to the width of the contour groove and different series of contours. T-bolts are movable anchor bolts. So, what should Hex Bolt Manufacturers tell you when installing T-bolts?
1. Before installing the direct-buried bolts, you must be familiar with the drawings and understand the geometric dimensions, position and height of each bolt and bolt frame. Before construction, put each bolt and bolt frame in place at each construction position, and verify that the number and geometric dimensions of a batch of parts are consistent with the drawings.
2. Designate a special person to list and check the construction quality, size, elevation and axis position of the bolt frame installation.
3. In the construction process, first of all, the field welding of the bolt frame should have higher standards and strict requirements. For welding requirements, the integrity of the weld must be checked and accepted according to the acceptance specification. In terms of controlling the geometric size between each bolt, the steel bars must be welded and fixed to ensure that the concrete is not easy to move when pouring.
4. After fixing each bolt, use the instrument to combine its elevation dimension to make it correct. After the bolts are all fixed in place, use bolt sleeves or tape to protect each bolt thread.
5. When pouring and compacting concrete, do not cut the pump tube directly above the bolt. Avoid using bolts and bolt frames. After pouring the concrete, the geometric size, axis position and height of the bolts should be checked again. If any displacement is found, it should be corrected in time to avoid failure to install the equipment in the future.
Through the above introduction, Stud Bolt Supplier hopes that you can simply refer to the content of this article in future use.
