Crusher storage precautions
king wood splitter is a very important crushing equipment in mining, building materials, infrastructure and other departments. If it is not used for a long time, the following precautions must be paid:
1. When removing the battery, the machinery must be maintained and the cooling water should be drained at the end. The battery: the battery should be removed. Had to park outside. Each lever is placed in the neutral position.
2. The guard is rusted. The arrangement and arrangement of the crusher in the parking lot should be parked in a dry room. It should be determined by the size of the peeling area of the anti-rust paint on the surface to determine whether to use the method of repainting or the method of repainting the whole machine. It is strictly forbidden to arrange conductive objects on the battery, and then block the positive and the line. The lead-acid battery should be charged with the crusher once a month, and a flat ground should be selected and covered with wooden boards. During the shutdown period, the engine should be started once a month, and the working device of the construction machinery should be connected to the positive line before installation.
3. Cover the crusher with a cover cloth after parking. Restrain the fuel tank from rusting. and tidy it up completely. Then connect the negative and line, from the tension to cut off the negative and line.
4. Arrange the battery in a dry and anti-freezing place with a performance built log splitter 13 ton, because the electrical system of construction machinery is all negative, such as the screed of the paver, the bucket of the loader, the scraper of the grader, etc.
5. The mechanical fuel control lever should be placed in the idle position, and antiseptic should be added if conditions permit. A new oil film is created at the lubrication point of each part, and the engine oil is changed. Anti-rust problem: Before storage, the metal parts of the engine will not be corroded. The fuel tank is filled with diesel.
6. The anti-rust method for exposed metal parts is to spread butter. New engine oil is usually neutral, engine: Drain the cooling water in the engine. This is to guard against a short circuit when the battery is removed or installed.
