Nowadays, with the continuous development of the economy, there are more and more garbage, such as throwing away wood, etc., which are in urgent need of stacking. The black diamond 35 ton log splitter is the equipment to deal with these problems, so what is the reason when the wood shredder is not feeding? How can we solve it? Next, let's find out.
1. The price of wood shredder is low and the function is complete. When crushing materials, when we use the crusher to crush materials with different drying humidity, the feeding speed will change relatively. We slow down the feed rate of high humidity material, and we can speed up the feed rate of low humidity material. Assuming that the feed rate of the crusher is too fast, the equipment will be blocked and the crusher will not be discharged.
2. After long-term use, all parts of the wood shredder will have a certain degree of wear and tear, the crushing function of the worn part will decline, the material will not reach the initial effect, and the output value will also decline. At the same time, if the blade mainly used for crushing materials is severely worn and the crushing power cannot be guaranteed, then continuous feeding will constitute a blockage. What we need to do is replace the shredded blade. With the new blade, this problem can be easily solved.
3. Another cause of clogging may be boring viscosity issues. If the viscosity of the material crushed by the wood crusher is too high, it will adhere to the inner wall of the equipment during the crushing process. If it is not cleaned in time, it will continue to accumulate and then block.
The wood shredder is a new type of woodworking machinery and equipment, which is an ideal choice for the production of wood series. Crusher components are mainly composed of shell, bearing, filter screen, transmission wheel and groove frame. All materials are made of manganese steel. So what to do when its blade becomes dull? Let's find out together.
1. The blade becomes dull and does not wear out. Wood shredder blades can also be dulled if the lubricating effect of the wood shredder blade is not good, or if a lot of dust adheres to the blade due to squeezing sticky objects in the shredder. If we encounter this situation, clean the dirt on the blades and then lubricate the crusher blades;
2. The blade is slightly worn and dull. If the wear condition of the wood shredder blade is light, remove the dull shredder blade and clean it. After cleaning, you can enter the grinding process. Then reinstall the crusher blade. Warm reminder: After the repaired crusher blade is installed in the crusher, lubricate it once;
3. The blade becomes dull due to severe wear. If the crusher blade is very worn (it cannot be repaired or is too expensive to repair), a new crusher blade needs to be replaced. When new wood shredder blades are purchased and produced, we should pay attention to the quality of the shredder blades, choose a suitable manufacturer and good quality.
The above are the reasons and solutions for the red rock 25 ton log splitter unexpected. The whole set of equipment is driven by only one motor, with simple structure, compact layout, low price, stable operation, low energy consumption, high output, good quality of finished products and low processing cost. In addition to wood, it can also be used to cut fibrous straw materials such as bamboo, thatch, corn stalk, and sorghum stalk. Beautiful appearance, durable, high output, more than 50% higher than traditional wood flour mill. It is an ideal crushing equipment that cannot be replaced by any crushing equipment.
