Pulverizer machine is a kind of crushing machinery and equipment, which is widely used in many industries, and recycles a large amount of waste wood for secondary use, and solves the pollution caused by such waste wood in the processing process. Sunway's shredder customers are all over the country, but many customers do not care much about the maintenance and maintenance of the wood shredder equipment. This has also caused many customers’ shredders to often fail after being used for a period of time, and the output drops rapidly. A series of problems such as reduced efficiency, reduced crushing capacity, wood blockage, etc., so if you want the grinder to be able to carry out production operations in a high-strength state for a long time, then daily maintenance and maintenance are definitely indispensable NS.

　　The shredder uses a blade to continuously cut the raw material to complete the crushing effect. In this process, the blade will inevitably cause friction with the raw material, and this will cause excessive wear and damage to the blade. After half a month, we have to check the usage of the blade. If the blade is found to be worn, we need to sharpen it in time to avoid more and more serious wear. If the wear is more serious, then we can only replace the new blade. Here to remind everyone that we can also use the method of injecting lubricant into the blade surface to reduce the friction between the blade and the raw material, which in turn leads to the purpose of reducing the wear of the blade.

　　In addition, we should also pay attention to the following four points:

　　1. After working for 8 hours, the pulverizer can be shut down to rest. Pay attention when shutting down, stop feeding first, and turn off the power before proceeding. Especially in summer, when the weather is hot, the shutdown can play a role in cooling the machine.

　　2. For each work shift, you need to add butter to the grinder, which can be added using a grease gun. In the process of adding butter, pay attention to not too much.

　　3. After the work is over, the machine needs to be cleaned, especially the internal cleaning. When cleaning the inside, you can use the various tools in the toolbox to open the outer shell of the machine, and clean the inside carefully. Sawdust remaining in the machine.

　　4. Check each part. Before starting up and use, check the stability of the screws, the tightness of the V-belt, whether the vulnerable parts such as the screen and the cutter head are damaged, and then replace them in time.

　　In the daily use of the shredder, good maintenance and maintenance can improve the work of the machine. The equipment can be used for papermaking, power generation, bedding, feed, fertilizer, organic mulch, sawdust board, particleboard, fiberboard, MDF , Buddha incense, mosquito incense, edible fungus, insulating materials and so on.

Our company not only has Pulverizer machine but also many other products, such as Cyclone Collector, etc. Welcome to visit our company!