Whether it is the refrigerator compartment of the Chest Freezer Factory or the refrigerator compartment of a household refrigerator, the refrigerator compartment will freeze during use. The method of solving icing in factory cold rooms is similar to that of household refrigerators. Take the solution of refrigerators as an example to solve the problem of icing in factory cold rooms.
If the icing is thick, deicing should be done in time, first cut off the power, then open the freezer door, take out the food, wait for it to melt naturally, and clean it up. It can also be cleaned with special cleaning tools, but it cannot be cleaned with metal products to avoid damaging the pipeline. You can also add a cup of boiling water to speed up the melting speed. If the drain port of the refrigerator compartment is blocked, causing poor drainage, too much water in the tank causes icing, you need to check first, there is a drain hole in the middle and lower-middle of the rear wall of the refrigerator compartment, if it is blocked, it can be washed and softened. Open the wire barrel and drain the water smoothly. If the temperature in the refrigerator compartment is set too low and the melted water cannot be discharged during the normal shutdown of the refrigerator, which causes freezing, you can check it. There is a drain hole in the rear wall of the refrigerator compartment, and the melted water can be discharged during a normal shutdown. , After a long time of use, it is blocked by a small amount of debris (or slightly), causing the water to be unable to drain out of the box, and water will accumulate in the fresh-keeping layer.
The small hole that leads to the bottom is a curved pipe, which cannot be solved with a poke. Open the small lid at the back of the refrigerator, and you can see the head of the drainage pipe. You can blow out the debris by blowing hard against the pipe. Then pour some clean water from the drain hole in the refrigerator and rinse it a few times.